Straight Edge Land SurveyorMedford, MA (781) 628-7809

What to Expect: The Land Surveying Process

A surveyor shows up with equipment, sets iron rods in the ground, and hands you a sealed drawing.

Straight Answers

  • Free Estimates
  • You approve before work begins
Land Surveyor How It Works in Medford

Request an Estimate

No obligation

Call (781) 628-7809

After you reach out

  1. Tell us about the job
  2. Expect a quick callback
  3. Ask anything, no obligation

We'll give you a call back during business hours.

Send this and a local provider gets your details so they can contact you about your request. We don't sell your information. See our Privacy Policy.

By entering your phone number, you're OK with us and the local provider texting you about your request. Consent is not a condition of purchase. Message frequency varies; msg & data rates may apply. Reply STOP to opt out, HELP for help. See the SMS section of our Privacy Policy.

This page covers what happens between the first call and that drawing, what it costs in Medford, and whether you can get by without paying for one.

Can you get a survey for free?

Not really. A boundary survey is fieldwork plus a sealed drawing, and somebody has to do both. What you can do is look at what you already have before you call. If you have an earlier survey with a surveyor's seal on it, bring it along and we will tell you whether it covers what you need.

A mortgage plan is a different thing. It is only a rough layout and may not be enough for a fence, a permit, or a disagreement over where the line falls. In Medford, when a plot plan is required, it generally has to be prepared by a registered professional land surveyor. If you are headed to the Building Department, a mortgage plan will probably not get you through the counter.

A document you already own works when it shows what you need and nobody is disputing the line. Once a permit or a neighbor is involved, it usually does not.

Next read: boundary survey. Hiring for a land surveyor in Medford? Start with our home page.

Who signs the drawing

Every survey we deliver is sealed by the licensed professional surveyor of record. That person's license number is stamped on the iron rods, aluminum caps, and PK nails we set at the corners. If you pull up a cap years from now, it tells you who set it.

The seal is what makes the plat usable for anything official. A sketch without one is a sketch.

Land surveyor how it works, example photo

From first call to sealed plat

The work runs in a set order. The crew goes to the site, measures the parcel, and sets the corners with iron rods, aluminum caps, or PK nails. While they are there, they locate improvements, easements, and encroachments: fences, drives, and structures near the lines. A fence that sits a foot over, or a driveway that wanders onto the neighbor's side, ends up on the drawing instead of surfacing later.

Back in the office we draft the survey plat or map, and the surveyor of record seals it. Where the state requires it, we file the record of survey with the county. Then we deliver the sealed drawing to you.

What it costs

A residential boundary survey on a platted lot in Medford typically runs $575 to $1,400. Construction staking is priced per visit, at $575 to $1,700 a visit, so the total depends on how many visits your job needs.

A ballpark for either one is something we will quote on the first call. A lot with fences, drives, or buildings close to the lines takes more locating than a clear one, and that is where the spread in the range comes from. Tell us what you are building and what you can see on the ground, and we will tell you where in the range it is likely to land.

You Might Also Need

A two-minute call is all it takes, there's no commitment.

Updated October 2026

← All land surveying in Medford